1 |
Ceramic/Glass Mug |
180︒C / 350 F |
15Sec |
1. Printing on sublimation paper, mirror image; 2. Use mug press; 3. Medium Pressure |
2 |
Metallic Mugs |
180︒C / 350 F |
15Sec |
1. Printing on sublimation paper, mirror image;2. Use mug press;3. Medium Pressure |
3 |
Ceramic Plate |
180︒C / 350 F |
360Sec |
1. Printing on sublimation paper, mirror image;2. Use 3D Vac-u-press; |
4 |
Ceramic Plate |
180︒C / 350 F |
120Sec |
1. Printing on sublimation paper, mirror image;2. Use plate press;3. Medium pressure. |
5 |
Ceramic Tile |
180︒C / 350 F |
360Sec |
1. Printing on sublimation paper, mirror image;2. Use flat heat press;3. Printing side upward for better printing;4. Medium pressure. |
6 |
Metal Board (Aluminum/Metal Material) |
180︒C / 350 F |
60Sec |
1. Printing on sublimation paper, mirror image;2. Tear off the protective film on the board before printing;3. Use flat heat press;4. High pressure. |
7 |
Ceramic Christmas Ornament (Both-side Printable) |
180︒C / 350 F |
360Sec |
1. Printing on sublimation paper, mirror image;2. Use flat heat press;3. Printing side upward for better printing;4. Medium pressure.5. Print both sides simultaneously. |
8 |
PU Keychain |
180︒C / 350 F |
60Sec |
1. Print on the sublimation paper, mirror image;2. Take off the metal ring before printing. |
9 |
T-Shirt (Non Cotton Material) |
180︒C / 350 F |
60Sec |
1. Printing on sublimation paper, mirror image;2. Use flat heat press;3. High pressure;4. Only for non cotton material, polyester mostly. |
10 |
T-Shirt (Light Color Cotton Material) |
180︒C / 350 F |
15 Sec |
1. Printing on light color transfer paper (blue grid on the back) through printer with pigment ink, mirror image; 2. Use flat heat press; 3. High pressure; 4. Peel off the transfer paper immediately after printing; |
11 |
T-Shirt (Dark Color Cotton Material) |
180︒C / 350 F |
15 Sec |
1. Printing on dark color transfer paper (red grid on the back) through printer with pigment ink, non mirror image; 2. Peel off base paper before printing, tag the image on T-shirt upwards and put silicon paper above; |
12 |
Textile (Polyester/Canvas Material) |
180︒C / 350 F |
90 Sec |
1. Printing on sublimation paper, mirror image; 2. Use flat heat press; 3. High pressure; |
13 |
Puzzle (Paper/Flet/Fabric/Hardboard Material) |
180︒C / 350 F |
90 Sec |
1. Printing on sublimation paper, mirror image; 2. Image and printing side matched tight without margin; 3. Medium Pressure. |
14 |
Water Bottle (Aluminum/Stainless Steel Material) |
180︒C / 350 F |
15 Sec |
1. Design shall not be 10 cm higher than the heater, or use Silicon Mug Wrap for bigger printing area; 2. Printing on sublimation paper, mirror image; 3. Plastic cover shall be taken away before printing; |
15 |
Sublimation Glass Frame |
180︒C / 350 F |
360 Sec |
1. Printing on sublimation paper, no mirror image; 2. Thermal tape not to tagged on the printing side; 3. Printing side upward with medium pressure, 10mm thickness one preheat downward 2mins firstly. |
16 |
Glass Cutting Board (Tempered Glass) |
180︒C / 350 F |
360 Sec |
1. Printing on sublimation paper, no mirror image; 2. Use flat heat press; 3. Medium pressure. |
17 |
Sublimation Crystal |
180︒C / 350 F |
360-420 |
1. Printing on sublimation paper, no mirror image; 2. Thermal tape not to tagged on the printing side; 3. Printing side downward to be preheated for 2-3mins, then upward printing with medium pressure. |
18 |
MDF Items |
180︒C / 350 F |
90 Sec |
1. Printing on sublimation paper, mirror image; 2. Tear off protection film before printing; 3. Medium pressure. |
19 |
Plastic Mug |
180︒C / 350 F |
120 Sec |
1. Printing on sublimation paper, mirror image; 2. Put the printing tool into the mug before printing to avid deformation; 3. Medium pressure. |
20 |
Polymer Material |
180︒C / 350 F |
120 Sec |
1. Printing on sublimation paper, mirror image; 2. Printing side by side, peel off the sublimation paper after printed one side, thermal paper needed to protect the other side during printing; 3. Medium pressure. |
21 |
Fridge Magnet |
180︒C / 350 F |
100 Sec |
1. Printing on sublimation paper, mirror image; 2. Use flat heat press; 3. Medium Pressure. |
22 |
Photo Slate (Rock) |
180︒C / 350 F |
420-600 Sec |
1. Printing on sublimation paper, mirror image; 2. Image and printing side matched tight without margin; 3. Printing image side down; 4. Medium Pressure. |
23 |
Cat Bowl/Dog Bowl |
190︒C / 390 F |
1020 Sec |
1.Use Sublimation Oven 2. Stick image on the item and wrap it with a bowl wrap; 3. Preheat the machine to 190 |
24 |
Stainless Steel Bottle (Printed with Wraps by Oven) |
190︒C / 390 F |
420 Sec |
1. Use Sublimation Oven 2.Print on the sublimation paper, mirror image; 3. Wrap the image and bottle tightly with mug wrap; 4. Remove the plastic lid before printing. |
25 |
Shot Glass |
190︒C/390 F |
1020 Sec |
1. Printing on sublimation paper, mirror image; 2. Fix the paper and the mug tightly with thermal tapes (thermal tapes shall be kept away from the golden rim); 3. Preheat the heater till 195 |
26 |
3D Phone Cover |
190︒C / 390 F (Without Preheat) |
600 Sec |
1. Printing on sublimation paper, mirror image; 2. Tear off protection film before printing; |
27 |
3D Phone Cover |
190︒C/390 F (With Preheat) |
150 Sec |
1. Printing on sublimation paper, mirror image; 2. Tear off protection film before printing; 3. Fasten the picture with the cover with thermal tapes outside and inside; |
28 |
3D iPad Cover |
xxxxxxc |
600 Sec |
1. Printing on sublimation paper, mirror image; 2. Tear off protection film before printing; 3. Folding the paper through the diagonal and press tight; |
29 |
3D iPad Cover |
190︒C/390 F (With Preheat) |
240 Sec |
1. Printing on sublimation paper, mirror image; 2. Tear off protection film before printing; 3. Fasten the picture with the cover with thermal tapes outside and inside; |